Differences

This shows you the differences between two versions of the page.

--- tyokaluja:ompelukoneet [15.10.2021 14:12] – added YouTube links sandplum
+++ tyokaluja:ompelukoneet [15.10.2021 16:36] – added juki information sandplum
@@ Line 8: / Line 8: @@
 [[https://www.youtube.com/watch?v=KHHk3dz0Y2s |Threading Guide JUKI DDL-8500 & 8700 Industrial sewing machines]] (YouTube)
+{{ :file:ddl-8700_manual.pdf |Juki DDL-8700 Manual}} (pdf)
+{{ :file:ddl-8500_p.pdf |Juki DDL-8500 Parts List}} (pdf)
+== LOCKSTITCH or STRAIGHT SEWING MACHINES ==
+DO NOT switch the bobbin cases!
+  * If the stitch is uneven or messy, check the thread tension and adjust the screw if necessary. The thickness of the thread also affects the bobbin case.
+The quality of the stitch is also affected by the needle.
+  * The right kind of needle is required!
+  * The thickness of the material/thread to be sewn affects the size of the needle.
+  * Check the needle and if it is broken, replace it.
+Wind the bobbin on the right side of the machine.
+  * When winding,
+     *• Raise the presser foot up.
+     *• Take the thread out of the needle eye.
+     *• “Drive” to full to allow the oil to circulate in the device properly.
+  * The bobbin must rotate clockwise in the housing.
+Clean the machine after use.
+  * The machine has hinges to allow the machine to tilt backwards.
+  * The machine can be cleaned with compressed air.
 ----