Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
tyokaluja:ompelukoneet [14.10.2021 17:24] – created sandplumtyokaluja:ompelukoneet [20.01.2024 16:31] (current) – added Jaguar serger section and image Holly Poer
Line 4: Line 4:
 ---- ----
  
-=== Juki DDL-8500 lukkotikkikone – industrial sewing machines ===+=== Juki DDL-8500 lukkotikkikone – industrial sewing machine === 
 +{{ :file:juki_ddl8500-luminix.jpg?200 |Juki DDL8500}} 
 + 
 + 
 +[[https://www.youtube.com/watch?v=KHHk3dz0Y2s |Threading Guide JUKI DDL-8500 & 8700 Industrial sewing machines]] (YouTube) 
 + 
 +{{ :file:ddl-8700_manual.pdf |Juki DDL-8700 Manual}} (pdf) 
 + 
 +{{ :file:ddl-8500_p.pdf |Juki DDL-8500 Parts List}} (pdf)  
 + 
 +The Organ needles are for use in the Juki machines and are stored in the drawer below the machine: 
 +{{:file:organ_needles_juki-hollypoer.png?direct&200|}} 
 + 
 +=LOCKSTITCH or STRAIGHT SEWING MACHINES == 
 +DO NOT switch the bobbin cases! 
 +  * If the stitch is uneven or messy, check the thread tension and adjust the screw if necessary. The thickness of the thread also affects the bobbin case. 
 + 
 +The quality of the stitch is also affected by the needle. 
 + 
 +  * The right kind of needle is required! 
 +  * The thickness of the material/thread to be sewn affects the size of the needle. 
 +  * Check the needle and if it is broken, replace it. 
 +  
 +Wind the bobbin on the right side of the machine. 
 + 
 +  * When winding, 
 + 
 +     *• Raise the presser foot up. 
 +     *• Take the thread out of the needle eye. 
 +     *• “Drive” to full to allow the oil to circulate in the device properly. 
 +     
 +  * The bobbin must rotate clockwise in the housing. 
 +  
 +Clean the machine after use. 
 + 
 +  * The machine has hinges to allow the machine to tilt backwards. 
 +  * The machine can be cleaned with compressed air.
  
 ---- ----
  
 === Rimoldi 27.01 saumuri joustava – 3-thread overlocker machine === === Rimoldi 27.01 saumuri joustava – 3-thread overlocker machine ===
 +{{ :file:rimoldi_27-luminix.jpg?200 |Rimoldi 27}}
 ---- ----
  
 === Rimoldi 263-46-3MD-05 tasosaumakone joustava – coverstitch machine === === Rimoldi 263-46-3MD-05 tasosaumakone joustava – coverstitch machine ===
  
 +18.7.2023 Kone muutettu 2-neulaiseksi ja 3-lankaiseksi. Langankatkaisuleikkuri poistettu. /jenniplatina
 +
 +{{ :file:rimoldi_263-luminix.jpg?200 |Rimoldi 263}}
 +
 +Tikkiesimerkki
 +{{ :tyokaluja:tikkiesimerkki2.png?200 |tikkiesimerkki}}
 ---- ----
  
 === Union Special saumuri === === Union Special saumuri ===
 +{{ :tyotilat:union_special-luminix.jpg?200 |Union Special}}
 ---- ----
  
 === Strobel === === Strobel ===
 +{{ :file:strobel-luminix.jpg?200 |Strobel}}
  
 +[[https://www.youtube.com/watch?v=LoNjvhtYg3w |Strobel 141 40 Fur-Sewing Machine Single Thread Overseaming Machine For Fur]] (YouTube)
 +
 +[[https://www.youtube.com/watch?v=fAhZT1j4BBY |STROBEL Kl. 72 FF, Fur/ Leather Industrial Sewing Machine*Made in Germany*]] (YouTube)
 +----
 +
 +=== Jaguar Epochlock 055D ===
 +{{ :tyokaluja:jaguar_epochlock_055d.png?200 |Jaguar}}
 +----
  
 +=== Singer ===
 +{{ :file:singer_graduate_714_sewing_machine.pdf |Singer 714 Manual}} (pdf)
  
  
Back to top